Snapware Total Solution Medium Rectangle Lid: Fit and Seal Care

Quick answer

To keep a Snapware Total Solution lid sealing, match it to the correct container shape and size, then wash and dry the green seal separately so it sits flat. If the lid won't snap, check the seal for food debris or warping before forcing it.

Step-by-step lid fit and seal care

1. Match the lid to the container: Confirm the container is a rectangle medium Total Solution model before snapping the lid on. Check the base for model numbers 7211R or 8608. Do not assume a lid from a round or large container will fit. If the model number is worn off, compare the lid's shape and size against the container rim before washing it.
2. Remove and inspect the green seal: Lift the green gasket out of its channel and look for food residue, cracks, or stretching. A seal that sits proud of the channel or has soft, stretched edges will not press tight. Photograph the seal position before removing it the first time so you can refit it the same way.
3. Clean the seal and channel separately: Wash the gasket and the lid channel with warm soapy water, using a soft brush in the groove. Rinse and dry both completely before refitting. Do not put a stretched seal back while wet. A dry channel and dry seal grip better than a damp assembly.
4. Reseat the seal evenly: Press the gasket back into the channel a little at a time, working around the rim. Check that no section is twisted or lifted. A seal that sits flat all the way around is ready to use. Run a finger around the inside edge to feel for any lifted section before snapping the lid on.
5. Snap the lid down and test: Press the lid onto the container and snap each tab down in turn. Fill the container with water, seal it, and turn it on its side over the sink. If water escapes at a corner, lift the lid and reseat the seal. Test with water before storing liquids or messy foods.
6. Know when to replace: If the lid still leaks after cleaning and reseating, or if the rim is cracked or the tabs won't click, replace the lid rather than forcing it. A forced lid can pop off in a bag. Keep a spare lid on hand if you rely on the container for travel.

Product facts

• Snapware® Total Solution® Medium Rectangle Plastic Lid with Green Seal: This leak-proof lid fits rectangle medium Total Solution containers of the same shape and size, including models 7211R and 8608. Matching both shape and size prevents the lid from snapping down unevenly or leaking at the corners.